Locking Elements

Taper Pins

Taper Pins are preferred for parts which have to be taken apart frequently and when driving out the Cylindrical Pins, would tend to wear the holes and also to very accurate constructed tools and gauges which have to be kept in absolute alignment. A very useful product in the mechanical and engineering fields.

Threaded Taper Pins

Split Cotter Pins DIN 94

A split pin, also known as a cotter pin or cotter key, is a metal fastener with two tines that are bent during installation, similar to a staple or rivet. Typically made of thick wire with a half-circular cross section, split pins come in multiple sizes and types. Product Details: Condition New Cotterpin/Split pin can be defined as h alf-round wire that are folded over onto themselves with a loop at one end, which provides a head. Cotter Pins anchor various assemblies by being inserted through a drilled hole in a shaft or bolt and spreading the points to hold the assembly in position. Download Datasheet from: https://www.jcfasteners.com/downloads/

Spring Dowels DIN 1481

Dowel pins or Spring dowel pins can be used to assemble parts without screws. Spring dowel pins do not require threads. . Spring dowel pins are shock absorbing and also vibration resistant when compared to normal dowel pins.

Spiral Dowel - Coiled Spring Pin - ISO 8750 AISI 301

A coiled spring pin, also known as a spiral pin, is a self retaining engineered fastener manufactured by roll forming metal strip into a spiral cross section of 2 1/4 coils. Coiled spring pins have a body diameter larger than the recommended hole diameter and chamfers on both ends to facilitate starting the pin into the hole, the spring action of the pin allows it to compress as it assumes the diameter of the hole.

Stainless Steel AISI 303 Cylindrical Dowel Pins DIN 7

Dowel pins are also referred to as parallel pins and are commonly used to retain parts in a fixed position or to preserve alignment.

CIRCLIPS External Type A Stainless Steel

External Circlips are used as retaining rings on bearing assemblies and are manufactured using semi-flexible metal ring. These products are in a shape of a circle with a clip and are open from one end

Circlips External Type E Stainless Steel DIN 6799

Circlips are fasteners, comprising semi-flexible metal ring with open ends. We can lock these Circlips into place, machine groove on a dowel pin or other parts. These permit rotation to many machines and prevent lateral movement as well.

CIRCLIPS Type B Internal Stainless Steel

These products are suitable for most normal engineering applications as these simply act as a rigid shoulder within a bore.Large range of sizes available. Made from Stainless Steel 1.4122, our range starts from 8mm bore size.